CrimeStopper CS-2200WST Operations Instructions

CS-2200WST WIRELESS SIREN / HOOD / TRUNK SYSTEM INSTALLATION & OPERATING INSTRUCTIONS INTRODUCTION CONGRATULATIONS on your choice of an

OPERATING INSTRUCTIONS OPEN ZONE ALERT & BYPASS If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY ARMED,

CARJACK PROTECTION ANTI HIJACK When the Ignition is on (running), press button #1 for 3 seconds. Parking lights will flash TWICE to confirm the Carj

PROGRAMMING ACTIVE RE-ARM WITH LOCK (ENABLE/DISABLE) 1. The system must in the disarmed state. 2. Ignition key must be in the ON position. 3. P

13

www.crimestopper.com Phone (800) 998-6880 FAX (805) 581-9500 © 2006Crimestopper Security Products ONLINE TECHNICAL SUPP

TABLE OF CONTENTS Installation Cautions & Warnings…….……………………………….……………………………………………2 Control Module & Component Mounting……………...……………………..…

CONTROL MODULE & COMPONENT MOUNTING DO NOT Mount the control unit in the engine compartment or where the control unit or wiring harness where the

WIRING BLACK/WHITE WIRE: (-) DOME LIGHT ILLUMINATION OUTPUT (Optional, requires a relay) Connect Black/White wire to terminal 85 of the relay (relay n

WIRING RED WIRE: +12V POWER INPUT (15 AMP FUSE) Connect to +12Volt source with supplied fuse & holder. Recommended location for this connection

POWER DOOR LOCK WIRING REVERSE POLARITY: Many Ford / Lincoln / Mercury / Dodge / Chrysler / Plymouth and early 90s GM Trucks Reverse polarity system

POWER DOOR LOCK DIAGRAMS ULREVERSE POLARITY DOOR LOCK WIRING+LNEGATIVE TRIGGER DOORLOCK WIRINGULLNOT USEDUNLOCK WIRECUTLOCK WIREFACTORYLOCKINGRELAY

OPERATING INSTRUCTIONS ALARM OPERATION CONDITION QUICK CHART: SIREN CHIRPS PARKING LIGHT FLASH SYSTEM STATUS 1 Siren Chirp 1 Parking Light Flash S

OPERATING INSTRUCTIONS REMOTE PANIC PROTECTION To sound the alarm upon command (panic), press and hold Button #1 for at least 4 seconds until the sir