Crimestopper SV-8400.RM User Manual download pdf

SV-8400.RM

Installation Instruction

Crimestopper Security Products Inc.

1770 So. Tapo Street

Simi Valley, CA 93063

(800) 998-6880

www.crimestopper.com

CONNECTIONS AND OPERATION

1. CONNECT THE RED WIRE TO +12V DC, PLEASE NOTE THE “RED

POWER WIRE” HAS TO CONNECT TO A POSITIVE 12 VOLT

CONSTANT POWER SOURCE OF POWER AND THE “BLACK WIRE

GROUND WIRE” SHOULD BE CONNECTED TO A GOOD CHASSIS

GROUND LOCATION OR THE NEGATIVE TERMINAL OF THE

BATTERY.

2. MOVE THE” MAIN POWER SWITCH” ON SIDE OF MONITOR TO

THE ON POSITION. THE MONITOR WILL AUTOMATICALLY TURN

ON AND OFF WHEN MONITOR IS DROPPED DOWN FROM LOCKED

POSITION.

3. CAMERA INPUT SIGNAL COMES FROM REAR VIEW CAMERA AND

PLUGS INTO “CAMERA INPUT (RED) RCA JACK.

4. OPTIONAL VIDEO SIGNAL COMES FROM VCD, VCR, OR DVD AND

PLUGS INTO “VIDEO INPUT (YELLOW) RCA JACK.

5. BACKUP CAMERA CONTROL WIRE (BLUE) CONNECTS TO +12

VOLTS DC OF CAR REVERSE LIGHT WIRE, WHEN THE GEAR IS IN

REVERSE, THE MONITOR IMAGE WILL AUTOMATICALLY SWITCH

TO THE BACK UP CAMERA.

6. USE “NOR/REV SELECTOR SWITCH” TO CHOOSE THE MIRROR

OR NON-MIRROR IMAGE.

7. MOVE THE “DIMMER SWITCH” TO SELECT BRIGHTNESS OF

IMAGE.

1 2

SV-8400.RM Installation Instruction Crimestopper Security Products Inc. 1770 So. Tapo Street Simi Valley, CA 93063 (800) 998-6880 www.crimes

Page 2

PRECAUTIONS 1. INSTALL THE MONITOR IN A CONVIENT LOCATION AWAY FROM EXTREME HEAT & COLD AND MAKE SURE THE SCREEN IS NOT IN DIRECT SUNLIGHT.

No comments

Crimestopper SV-8400.RM User Manual