CrimeStopper RS-4 Operations Instructions Page 1

Browse online or download Operations Instructions for Remote starters CrimeStopper RS-4. CrimeStopper RS-4 Operating instructions User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
RS3-G4 and RS4-G4
1-WAY REMOTE START SYSTEM
OPERATING INSTRUCTIONS
CONGRATULATIONS on your choice of a Cool Start Remote Engine Starter and Keyless Entry with DP
Technology by Crimestopper Security Products Inc. This booklet contains the information necessary for operating
your system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc.
*IMPORTANT INFORMATION: Primary and Optional Features
-PRIMARY: These are features that must be connected in order for the system to operate properly i.e. Remote
Start connections, Flashing lights, and Brake Reset. For programming, the hood pin and program button are
required.
-OPTIONAL: These features are to be connected only if desired or agreed upon by the customer and the installing
dealer i.e. Door Locks, Trunk Pop, Dome Light Illumination, Horn-Honk, Anti-Grind, etc. These features may also
require additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is going to be
installed with your particular system.
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV 08.2012
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: 1) This device may not
cause interference, and (2) this device must accept any
interference that may be received, including interference that
may cause undesired operation. The manufacturer is not
responsible for any radio or TV interference caused by
unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.
Page view 0
1 2 3 4 5 6 ... 15 16

Summary of Contents

Page 1 - RS3-G4 and RS4-G4

RS3-G4 and RS4-G4 1-WAY REMOTE START SYSTEM OPERATING INSTRUCTIONS CONGRATULATIONS on your choice of a Cool Start™ Remote Engine Starter and K

Page 2 - TABLE OF CONTENTS

10 CONVENIENCE AND SAFETY FEATURES AUTO LOCK / UNLOCK (Option # 2) The Auto Lock feature controls whether the doors will automatically lock/unlock

Page 3 - USING THE REMOTE TRANSMITTER

11 CONVENIENCE AND SAFETY FEATURES VALET MODE Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into

Page 4 - REMOTE ENGINE CONTROL

12 TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The RS4-G4 learns up to 4 different transmitter c

Page 5

13 2-VEHICLE OPERATION & PROGRAMMING A single Remote Control can control two different vehicles. To set up the 2-Vehicle operation you must f

Page 6

14 NO FACTORY KEYLESS ENTRY AFTER REMOTE START Most new cars Do Not allow the factory Remote Keyless Entry to function with the Ignition ON. This me

Page 7

15 BATTERY REPLACEMENT To Replace the Battery: The Remote Control uses two CR-2025 Lithium 3 Volt Batteries. Simply remove the Phillips screw loca

Page 8 - TURBO TIMER MODE (Option 22)

16 2-Way DATA PORT Some vehicles require a Databus Module to Bypass the factory Immobilizer and operate the keyless entry. Databus modules are used

Page 9

2 TABLE OF CONTENTS Operation Cautions & Warnings…….……………..….…………………………………….…………….….…………2 Using the Remote Transmitter……………………………………………………………………

Page 10

3 USING THE REMOTE TRANSMITTER VEHVEH RS3-G4

Page 11

4 STATUS LED STATUS LED: Used for Remote Start Diagnostics – page 14 (Optional, requires Installation of LED) LED will flash when locking your doors

Page 12 - TRANSMITTER PROGRAMMING

5 REMOTE ENGINE CONTROL REMOTE ENGINE STARTING – UNSUCCESSFUL START In the event that the engine does not start on the first attempt, the system shu

Page 13 - VEH 2 = Red LED

6 REMOTE ENGINE CONTROL IDLE DOWN MODE: This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed and

Page 14 - REMOTE START DIAGNOSTICS

7 REMOTE ENGINE CONTROL SELECTABLE HOURLY COLD-START MODE (1-4 HOURS) This mode allows the vehicle to be programmed to self-start every 1, 2, 3 or 4

Page 15 - BATTERY REPLACEMENT

8 TURBO TIMER MODE (Option 22) The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1, 3 o

Page 16 - 2-Way DATA PORT

9 MANUAL TRANSMISSION MODE (Option 11) MANUAL TRANSMISSION EXIT PROCEDURE (Option #11-1 and 11-3) This system features a Manual Transmission Mode.

Comments to this Manuals

No comments