CrimeStopper RS-4 User Manual download pdf

1 | P a g e

Installation Tips for your Remote Start (for Toyota and Lexus Vehicles) RS4.IM05.PkTi

v1.1

Thank you for purchasing your remote start from MyPushcart.com - an industry leader in providing remote starts to do-

it-yourself installers since 1999. We’ve put this tip sheet together to help you with your installation. The purpose of

this sheet is to help you organize your installation - not to replace your installation manual. You will still need to refer to

that.

If you provided us with your vehicle model/year at the time of purchase, you will have a wiring chart for your particular

vehicle. We’re going to refer to that a lot. If you do not have the wiring chart, email us at [email protected]

so we can send you a copy. Be sure to include the model/year of your vehicle, your name and your sales order number.

Two very important things before you get started:

• Read the entire installation manual. There are several safety tips in there that you need to know before you

start

• Avoid using a test light to probe wires. Test lights can set off air bags if you probe the wrong wire. Your

vehicle wiring chart will identify the correct wires that you’ll be tapping on to in your car. If you must probe,

use a digital multi-meter. They’re inexpensive and won’t set off air bags.

Overview

Your kit contains a remote start module and a bypass module. The bypass is used to temporarily override your factory

antitheft transponder key. When you open the packages, you’ll see a lot of wires. Don’t worry – you won’t be using

most of them. Later on we’ll show you exactly which ones you’ll need to use.

There are 4 basic steps to this remote start installation. We’re going to address each of these:

1. Make your wiring connections for the remote start

2. Program the bypass

3. Test the system

4. Button it up!

Need to know where all the components go? See Installer’s Tip #1 on page 6

Step 1 – Wiring

We’re going to break the wiring down into three parts – your main power connections, what we’ll call your ‘secondary’

connections for your remote start, and connections for the bypass module.

Here’s where the vehicle wiring chart comes into play. The wiring chart will help you locate the wires that you’re going

to need in your car. Don’t be intimidated by all the different wires listed on the chart – you’re only going to be using a

few of them. Your wiring chart will come from Crimestopper.

1 2 3 4 5 6

Summary of Contents

Page 1 - Step 1 – Wiring

1 | P a g e Installation Tips for your Remote Start (for Toyota and Lexus Vehicles) RS4.IM05.PkTi v1.1 Thank you for purchasing your remote sta

Page 2

2 | P a g e Reading your wiring chart Each line of the wiring chart contains 3 pieces of information that you will need (continued on next page):

Page 3

3 | P a g e For CRIMESTOPPER Remote Starts Remote Start Wire Connect to T-Harness Wire: Red (6-pin harness, 2 wires) T-Harness RED Pink (6-pin

Page 4 - Step 2 – Program the Bypass

4 | P a g e Installing your bypass Your bypass requires the following connections: Brown Connect to remote start black/yellow in 12-pin harn

Page 5 - 5PM Arizona Time

5 | P a g e Step 3 – Test The System You should now be able to remote start the car. To shut the car down, tap the brake pedal. If you have fac

Page 6

6 | P a g e This is the method preferred by the best professional installers. It makes for the most reliable connections, but it is also the most

CrimeStopper RS-4 User Manual

Browse online or download User Manual for Remote starters CrimeStopper RS-4. Installation Tips for your Remote Start (for Toyota

Summary of Contents

More documents for Remote starters CrimeStopper RS-4

Comments to this Manuals

CrimeStopper RS-4 User Manual

Browse online or download User Manual for Remote starters CrimeStopper RS-4. Installation Tips for your Remote Start (for Toyota

Summary of Contents

More documents for Remote starters CrimeStopper RS-4

Comments to this Manuals

Related products and manuals for Remote starters CrimeStopper RS-4